2.8 inch display manufacturer_LCD color screen_resistive touch screen_high definition liquid crystal screen

  • Resolution: 240 x 320 dots
  • Viewing angle: 12 O'clock
  • Interface Type: RGB
  • Driver chip: ST7789V
  • Touch method: RTP/CTP
  • Backlight Brightness: 350 cd/m²
  • 外形尺寸:50.00(W)* 69.20(H) * 3.30(T)mm

Basic description

2.8寸TFT LCD液晶显示屏分辨率为240×320,驱动IC为ST7789V,亮度高达500cd/m2以上,带电阻触摸屏RGB接口。彩色TFT LCD显示屏低功耗,低噪音,色彩真实鲜艳,高对比度,高清分辨率响应刷新速度快,颜色支持高达16M 色,可显示高质量动态清晰的图像和图形模型。

ICP DAS Lcd display quality is higher than the industry standard, batch products without color deviation, color and brightness consistency, in line with industrial and consumer grade production process requirements, stable quality, LCD display industry good customer reputation and credibility, welcome to call us, we will provide you with the best quality products and services.

sports event element unit (of measure)
sizes 2.8寸LCD屏 inch (unit of length equal 2.54 cm.)
Overall dimensions 50.00(W)* 69.20(H) * 3.30(T) millimetre
display area 43.20×57.60 millimetre
fractional 240×320
LCD Type a-Si TFT
visual angle 12 0'CLOCK
driver chip ST7789V
Interface Type RGB
operating temperature -20℃~ 70℃
Storage temperature -30℃~ 80℃
LED light 4 LEDs

The above display technical parameters to LCD display specifications shall prevail, customer satisfaction is our eternal purpose, thank you for choosing our display and service.

blueprint

HC-280CI4026-drwing

PIN Definition

pin number Pin Definitions Functional Description
1 GND structural particle: used before a verb or adjective, linking it preceding the verb or adjective
2 LEDA Backlight Positive
3-6 LEDK1-LEDK4 Backlight Negative
7 XR Touch right
8 YU touching up
9 XL Touch left
10 YD touchdown
11 RESET reset signal
12 VHSYNC frame synchronization
13 HSHNC line synchronization
14 DOTCLK Data Bit Clock
15 DEN data entry
16-21 R0-R5 data cable
21-27 G0-G5 data cable
28-33 B0-B5 data cable
34 SDO Serial data output
35 SDI Serial Data Input
36 SCL clocks
37 CS film selection
38 IOVCC Interface Voltage
39 VCI Interface Voltage
40 GND structural particle: used before a verb or adjective, linking it preceding the verb or adjective

About Samples

Three TFT LCD liquid crystal displays are provided free of charge.

Depending on the need for communication and validation, and standard or customized materials, such as resistive or capacitive touch screen, FPC or backlighting, the structural drawings of TFT LCD LCD display are arranged within 2-3 days for customer confirmation.

Sample delivery time for standardized TFT LCD displays is 2-3 days. For customized TFT LCD display, samples are made according to the confirmed drawings. Sample production takes time.Sample delivery lead time for TFT LCD display is generally 7-12 days. Cycle time is 18-21 days.

After the samples are made, they will be inspected according to the sample delivery process. A series of structural and electrical performance tests, high, low temperature and thermal shock aging tests, vibration tests, salt spray tests, etc. will be arranged according to the quality control procedures. We provide actual test reports of TFT LCD display to ensure the reliable performance of TFT LCD display.

FAQ

Yes. We are a display manufacturer with 12 years of production experience, we can provide monthly production capacity of 800K/PCS.

We already have agents in some areas and we are looking for more in certain areas.

We carry out a strict quality control checking process, and each display 100% passes at least 5 positions of electrical performance inspection before leaving the factory.

We provide 12 months warranty. If there is more than 0.6% quality problem, we will analyze the LCD and provide a report with short and long term solution. If there is more than 3% quality problem, we will replace it again.

1. A long-term partner with competitive price and stable quality.

2. One-to-one sales service and perfect after-sales service.

Standard Display

Customized Displays

 

① Customized backlight and interface cable FPCs
Brightness, interface, FPCA can be customized according to customer requirements.
Interface conversion between RGB, SPI, MCU, EDP, LVDS, MIPI.

② Ultra High Brightness

High brightness backlight technology (≥1000nits), still clearly visible under sunlight.

③ EWV (Extra Wide Viewing Angle)

Up, down, left and right viewing angles can be 60 degrees.
IPS Full Viewing Angle with up, down, left and right viewing angles up to 85 degrees.

④ Touch screen

Capacitive touch screen AR (anti-reflective), AG (anti-glare), AF (anti-fingerprint), touch screen TFT LCD display OCA optical integrated lamination.
4-wire or 5-wire resistive touch screen, glossy/matte can be customized.

 

By continuously providing innovative display solutions to different industries around the world, we understand that every LCD display is unique and every customer is special. That's why ICP DAS produces a wide range of LCD displays to meet different requirements.TFT LCD liquid crystal displayto serve different industries.

Product Video

</p>

Scroll to Top