Product Center

Main Menu
TFT Products

look for sth.
3.0inch-lcd

Semi-transparent display_Semi-transparent and semi-transparent TFT LCD screen_3 inches

  • Resolution: 240 x 400 dots
  • Viewing angle: 12 o'clock
  • Interface Type: RGB
  • 驱动芯片：HX8352B
  • Touch method: RTP/CTP
  • Backlight Brightness: 350 cd/m²
  • 外形尺寸：45.04(W)*77.05(H)*2.6(D)
Enquire Now
13686872949

Basic description

3寸半反半透LCD液晶显示屏分辨率为240×400，驱动IC为HX8352B，半反半透lcd显示屏和半透半反液晶显示屏，具体低功耗，高透过的显示效果，阳光下可见，可提高tft lcd液晶显示屏在阳光下的可视效果。反射显示模式功率为透射模式的 10%，具有超低功耗显示特性，相比现有 PID 高亮产品，TRD 户外显示功耗可降低约 90%。在动态显示方面，动态切换效果更优，无鬼影问题。

ICPD LcdmonitorQuality is higher than the industry standard, batch products without color deviation, color and brightness consistent, in line with industrial and consumer grade production process requirements, stable quality, good customer reputation and credibility in the LCD display industry, welcome to call us, we will provide you with the best quality products and services.

sports event element unit (of measure)
sizes 3.0寸显示屏 inch (unit of length equal 2.54 cm.)
Overall dimensions 45.04(W)*77.05(H)*2.6(D) millimetre
display area 38.88*64.8 millimetre
fractional 240×400
LCD Type a-Si TFT
visual angle 12 o'clock
driver chip HX8352B
Interface Type RGB
operating temperature -20℃~ 70℃
Storage temperature -30℃~ 80℃
LED light 3 LEDs

The above display technical parameters are based onLCD displayThe specification of the book shall prevail, customer satisfaction is our eternal purpose, thank you for choosing our display and service.

blueprint

TF300-19

PIN Definition

No. Symbol Description
1 BS0 See Note1

TF300-19A
2 BS1
3 BS2
4 RESET Active low. This signal is used to reset the device and must be applied to initialize the chip properly.
5 VSYNC Vertical Sync signal in RGB I/F mode.

If not used, connect this pad to either VCC or VSS.
6 HSYNC Horizontal Sync signal in RGB I/F mode.

If not used, connect this pad to either VCC or VSS.
7 PCLK Pixel clock signal in RGB I/F mode.

If not used, connect this pad to either VCC or VSS.
8 DE Data Enable signal in RGB I/F mode.

If not used, connect this pad to either VCC or VSS.
9-26 DB17-0 Data Bus. See Note1
27 SDO Serial Output data.
28 SDA Serial data bus. If not used, connect this pad to either VCC or VSS.
29 RD Read Enable in 80-parallel interface.

If not used, connect this pad to VCC.
30 WR Write Enable in 80-parallel interface.

Serial interface clock (SCL) in serial data interface.
31 RS(SCL) Display Data/Command selection signal in parallel interface
32 CS Chip select input pin (“Low” enable).
33 VCC Power Supply for Analog(2.5V-3.6V).
34 IOVCC Power Supply for I/O(1.65V-3.6V).
35 GND Ground

 
36 GND
37 LEDK4 Backlight Cathode4
38 LEDK3 Backlight Cathode3
39 LEDK2 Backlight Cathode2
40 LEDK1 Backlight Cathode1
41 LEDA Backlight Anode
42 XR(NC) NC
43 YD(NC) NC
44 XL(NC) NC
45 YU(NC) NC

About Samples

Three TFT LCD liquid crystal displays are provided free of charge.

Depending on the need for communication and validation, and standard or customized materials, such as resistive or capacitive touch screen, FPC or backlighting, the structural drawings of TFT LCD LCD display are arranged within 2-3 days for customer confirmation.

Sample delivery time for standardized TFT LCD displays is 2-3 days. For customized TFT LCD display, samples are made according to the confirmed drawings. Sample production takes time.Sample delivery lead time for TFT LCD display is generally 7-12 days. Cycle time is 18-21 days.

After the samples are made, they will be inspected according to the sample delivery process. A series of structural and electrical performance tests, high, low temperature and thermal shock aging tests, vibration tests, salt spray tests, etc. will be arranged according to the quality control procedures. We provide actual test reports of TFT LCD display to ensure the reliable performance of TFT LCD display.

FAQ

Yes. We are a display manufacturer with 12 years of production experience, we can provide monthly production capacity of 800K/PCS.

We already have agents in some areas and we are looking for more in certain areas.

We carry out a strict quality control checking process, and each display 100% passes at least 5 positions of electrical performance inspection before leaving the factory.

We provide 12 months warranty. If there is more than 0.6% quality problem, we will analyze the LCD and provide a report with short and long term solution. If there is more than 3% quality problem, we will replace it again.

1. A long-term partner with competitive price and stable quality.

2. One-to-one sales service and perfect after-sales service.

Standard Display

List of standard TFT displays
List of medium and large size lcd displays
Semi-reflective and semi-transparent tft display list

Customized Displays

 

① Customized backlight and interface cable FPCs
Brightness, interface, FPCA can be customized according to customer requirements.
Interface conversion between RGB, SPI, MCU, EDP, LVDS, MIPI.

② Ultra High Brightness

High brightness backlight technology (≥1000nits), still clearly visible under sunlight.

③ EWV (Extra Wide Viewing Angle)

Up, down, left and right viewing angles can be 60 degrees.
IPS Full Viewing Angle with up, down, left and right viewing angles up to 85 degrees.

④ Touch screen

Capacitive touch screen AR (anti-reflective), AG (anti-glare), AF (anti-fingerprint), touch screen TFT LCD display OCA optical integrated lamination.
4-wire or 5-wire resistive touch screen, glossy/matte can be customized.

 

By continuously providing innovative display solutions to different industries around the world, we understand that every LCD display is unique and every customer is special. That's why ICP DAS produces a wide range of LCD displays to meet different requirements.TFT LCD liquid crystal displayto serve different industries.

Product Video

</p>

Related products

Scroll to Top